News
High power PoE transformer
Power over Ethernet , or PoE , describes the technology that pass electric power along with data on twisted pair Ethernet cabling.
PoE technology enables to provide power to devices such as VoIP phone, a ccess Points , and IP cameras As the development of PoE technology, LinkCom and world’s leading IC manufacturers , Texas Instruments and Silicon Labs co develop higher power
applications to meet powered devices(PD) needs.
Common mode filter LTC0599 50 for Charging Pile application
In response to the trend in electric vehicle technology according to Cairn Energy Research global electric vehicle sales are expected to jump 36% in 2021 and break the 3 million vehicle mark for the first time However European countries are also expected to ban the sale of fuel cars by 2030 Advisors, while the International Energy Agency estimates that the global public charging pile is expected to have 10 20 million units in 2025 with a total charge volume of 70 124TWh .
EPD13.3 PoE transformer
Form factor EPD-13.3 is a low profile to reduce EMI. The advantage of EPD-13.3 is capable with EP-13. Height of EPD-13.3 is maximum 10mm which is lower than height of EP-13. At the same time, it can replace EFD-15 and reduce the use of PCB.
LinkCom’s VDSL transformer is approved by Realtek.
LinkCom’s DSL transformers, LAL0581-60 and LAL0582-60, are approved by Taiwan semiconductor, Realtek, Application is on ADSL1/2/2+/VDSL2 (including 35B). It is approving from European telecommunication company.
Coupling transformer of LTC0388-50 & LTC0389-50
The design was approved by Qualcomm PL16(QCA7005).The operating temperature is -40 ~+105 degree and the operation frequency band from 2Mhz to 30Mhz.
PoE power planar transformer
50W ACF PoE planar transformer (P/N: LPD0001-50) with size size 27mm*23mm*9.8mm, of application on PoE DC/DC active clamp forward switching power transformer. The application frequency is 300KHz, input voltage from 33V to 57V and the output 5V/10A.
Magnetics automatic production
Magnetic Division:
As a result of US-China trade war and shortage of labor in mainland China, LinkCom takes effort on increasing its own competitiveness. LinkCom has been taking action on magnetic automatic production for a year, which will dramatically reduce from approximately 90 percent down to approximately 50 percent manual made production process.
LinkCom Manufacturing Co., Ltd launched power inductor.
LinkCom Manufacturing Co., Ltd starts to auto production on power inductors, NR type and Molding type respectively. NR type includes NR30, NR40, NR50, NR60, and NR80 series. Molding type includes molding 04, molding 05,and molding06 series. Applications for power inductor are on
LinkCom’s new 2.5G BASE-T LAN filter LAN7241-50
LinkCom has been co-developing with world’s leading IC company on 2.5GBASE-T LAN filter, LAN7241-50, which is fulling with standard IEEE802.3bz and is capable of 1000BASE-T and 100BASE-Tx.
New PoE transformer apply on PoE+
LinkCom has developed new type of transformer named EPD-13, which can provide additional 25% power than EP-13.
The new LAN filter products LAN2241-60 meet the surge 6.0KV
The new LAN filter products LAN2241-60 meet the ITU-T K.21:2015,per 7.6 Basic level 6.0KV and meet IEEE802.3ab; apply in 100BASE-TX and 1000BASE-T.
The new LAN filter products LAN3181-67 and LAN3482-67 meet the surge 2.5KV
The new LAN filter products LAN3181-67 and LAN3482-67 meet the ITU-TK.21:2015,per 7.6 Basic level 2.5KV and meet IEEE802.3ab; apply in 100BASE-TX and 1000BASE-T.